Cleaning Of Thermal Print Head - AGFA DRYSTAR AXYS Service Manual

DD+DIS032.07E
3.8

Cleaning of Thermal Print Head

(1) Clean the TH resistor line with a lint
free cloth lightly moistened with
Isopropyl - alcohol.
•
The last cleaning action must be
carried out in one way!
•
For the Isopropyl alcohol observe the
rule: As less water is in the alcohol as
better. We recommend using a 90%
Isopropyl alcohol.
(2) Remount all covers
(3) Insert both input trays
CAUTION:
Thermal Print Head is fragile: Risk of damage.
When replacing or cleaning the Thermal Print Head great care must be taken.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
09-2007
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367
Maintenance
536609cg.cdr
Figure 13
Chapter 9 / 16
Agfa Company Confidential