Ricoh D131 Service Manual page 1458

Electrical Components: Main 2
20. 1st fold motor [A] ( p.19)
21. FM6 pawl HP sensor bracket [B]
22. FM6 pawl cam gear [C]
23. Release the tension bracket [D], and then remove the transmission pulley gear [E] (pin x
1)
24. Remove the entrance guide plate [A] at the 2nd fold unit ( x 4).
25. Hold the fourth fold roller cam [A] at the rear of the drawer unit.
26. Pull the fourth fold roller [B] to the front side .
27. Keep the FM6 pawl [C] open, and then remove the fourth fold roller .
Hold the holder [A] when pulling the fourth fold roller [B] in the direction.
SM 65 D454/D615