Club Car 2007 Carryall 295 Maintenance And Service Manual page 71

HYDRAULIC AND PARK BRAKE SYSTEMS
Figure 6-7 Axle Spindle Nut and Washer
5. Remove and discard the two hex-head bolts that secure the caliper assembly to the upright (Figure 6-8,
Page 6-11). See following CAUTION.
CAUT ION
• Wrap a plastic wire tie around the caliper body to a place on the frame so that it does not hang
suspended by the hydraulic brake hose.
6. Remove the outer tie rod end from the upright.
7. Remove the lower ball joint from the upright (Figure 6-9, Page 6-11).
Figure 6-9 Lower Ball Joint and Upright
8. Remove the upper ball joint from the upright (Figure 6-10, Page 6-11). See following NOTE and CAU-
TION.
NOTE: It may be necessary to use a ball joint removal tool to separate the ball joint stud from the upright.
2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual
Figure 6-8 Brake Caliper and Upright
Figure 6-10 Upper Ball Joint and Upright
6
Brake Disc and Hub
Page 6-11