Club Car 2007 Carryall 295 Maintenance And Service Manual page 129

PERIODIC MAINTENANCE: HONDA GASOLINE & KUBOTA DIESEL POWERED VEHICLES
1
3
Figure 10a-11 Remove Engine Oil Filter
Figure 10a-13 Add Engine Oil – Gasoline Vehicles
4. Use a clean, lint-free rag to wipe the oil filter port flange surface clean where the oil filter gasket seats.
5. To help seal the new oil filter to the oil port flange, apply a light coat of white lithium NLGI Number 2
grease (Dow Corning
surface of the filter before attaching it to the oil filter port (Figure 10a-12, Page 10a-11). Install the new
oil filter (gas: CCI P/N 1016467, diesel: CCI P/N 102703301) onto the engine oil filter port. See following
NOTE.
NOTE: Use only OEM oil filters designed for your engine.
6. Tighten the oil filter by hand 2/3 turn after gasket contact. Do not use a band wrench or channel lock pli-
ers.
2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual
2
®
BR2-Plus or equivalent) or new engine oil to the rubber seal around the outside
Figure 10a-12 Coat Rubber Seal
Figure 10a-14 Add Engine Oil – Diesel Vehicles
10A
Engine Oil
Page 10a-11