10A
PERIODIC MAINTENANCE: HONDA GASOLINE & KUBOTA DIESEL POWERED VEHICLES
1
Figure 10a-10 Engine Oil Drain Plug and Oil Filter –
Engine Oil Filter Change
1. Drain the engine oil. See Engine Oil Draining on page 10a-8.
2. Place the oil drain pan under the engine oil filter (2) (Figure 10a-9, Page 10a-9 or Figure 10a-10,
Page 10a-10).
3. Remove the engine oil filter. Turn it counterclockwise and drain the residual oil in the filter port and filter
into the oil drain pan. See following NOTE.
NOTE: An oil drip guard (1) can be used to prevent excess oil from dripping onto the engine base plate.
Use an empty quart (one liter) container and cut the bottom off at an angle, then slide the open
area of the container up and under the oil filter (2) before removal. Position the port of the plastic
container so oil will be directed into the oil pan (3) (Figure 10a-11, Page 10a-11). A drip guard can
be made by folding a piece of cardboard, thin metal, or plastic under the oil filter, forming a channel
to direct the filter port oil into the drain pan.
Dispose of used oil according to the environmental laws and regulations for your area.
Page 10a-10
2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual
2
VIEW FROM UNDERSIDE OF VEHICLE
Diesel Vehicles
Engine Oil