7
STEERING AND FRONT SUSPENSION
10. Install the caliper assembly on the upright with new lock-patch hex head bolts, and tighten the hardware
to 36 ft-lb (49 N·m). See Front Brake Pad and Caliper Installation, Section 6, Page 6-7.
11. Install the tire and wheel, and finger-tighten the lug nuts.
12. Lower the vehicle.
13. Tighten the lug nuts to 85 ft-lb (115 N·m).
14. Tighten the spindle nut and washer to 150 ft-lb (203 N·m).
15. Align the front wheels, and adjust the toe-in and the camber. See Wheel Alignment on page 7-11.
Page 7-20
2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual
Front Suspension Components