Blower Housing Removal (161400); Blower Housing Removal (260700, 261700); Blower Housing Removal (28Q700) - Briggs & Stratton Vanguard 05000 Manual

Blower Housing Removal
(161400)
1. Remove the five screws ([A] Fig. 4) that
secure the blower housing to the engine
block.
3
Blower Housing Removal
(260700, 261700)
1. Remove the oil dipstick cap.
2. Remove screws ([A] Fig. 5) from the
blower housing.
62
Fig. 4
Fig. 5
Blower Housing Removal
(28Q700)
1. Remove the oil cap and dipstick
assembly.
2. Remove the four screws (A) that secure
the rotating screen.
3. Remove the two mounting bolts ([B] Fig.
6) that secure the fuel pump mounting
bracket.
Fig. 6
4. Remove the two screws (A) that secure
the top of the outer housing to the inner
housing.
5. Remove the remaining screws ([B] Fig. 7)
around the perimeter of the outer blower
housing.
Fig. 7
6. Remove the two screws that secure the
front housing bracket (A).