4. Install governor gear. Ensure that
counterweights ([A] Fig. 30) move freely
without binding.
5. Install cylinder cover or sump. See
SECTION 10- CYLINDERS, COVERS
AND SUMPS.
NOTE: (161432 Type 0080-01)
assembling governor lever assembly (A), ensure
6
that tab on strike plate ([B] Fig. 31) is between
upper and lower half of lever clamping area.
6. Re install any components you removed
to gain access to the cylinder cover.
7. Perform a static adjustment. See
SECTION 1- SAFETY, MAINTENANCE
AND ADJUSTMENTS.
144
Fig. 30
When
Fig. 31