Briggs & Stratton Vanguard 05000 Manual page 123

(D) and float bowl screw washer ([B] Fig.
109).
2. Remove float hinge pin (A), ca rburetor
float (B) and float needle valve ([C] Fig.
110).
5
3. Remove main jet first ([A] Fig. 111) with a
carburetor jet scr ewdriver.
4. Remove carburetor emulsion tube ([ B]
Fig. 111).
5. Remove rubber plug ([C] Fig. 111).
122
Fig. 109
Fig. 110
Fig. 111
6. Remove screw ([A] Fig. 112).
7. Remove, throttle plate (B), throttle shaft
(C) and seal ([D] Fig. 112).
Fig. 112
8. Remove screw (A), choke plate (B), choke
shaft (C) and choke shaft seal ([D]
Fig.113).