ELECTRIC STARTER MOTORS
Electric Starter Removal
(138400, 235400, 245400)
1. Remove negative battery cable.
2. Disconnect the wire from the key switch.
3. Remove the nuts ([A] Fig. 35) that support
the starter motor.
4. Remove starter.
Fig. 35
1. Disconnect the wire from the voltage
regulator.
2. Remove the nuts ([A] Fig. 36) that support
the starter motor.
Fig. 36
Electric Starter Removal
(104700, 260700, 261700, 28Q700)
1. Remove the two bolts that secure starter
to cylinder ([A] Fig. 37 , 38,39).
Fig. 37
Fig. 38
Fig. 39
3
71