Briggs & Stratton Vanguard 05000 Manual page 124

Fig. 113
9. Remove idle speed screw ([A] Fig. 114).
Fig. 114
10. Remove pilot jet ([A] Fig. 115).
Fig. 115
TO CLEAN CARBURETOR: SEE SECTION 5-
FUEL SYSTEMS AND CARBURETION.
Assemble
1. Install pilot jet ([A] Fig. 116).
Fig. 116
2. Place new seal ([A] Fig. 117) lip down on
the choke shaft (B). Insert shaft into
carburetor while engaging detent spring
5
123