5. Install the upper (A) and lower ([B] Fig.
16) cylinder shields.
Fig. 16
6. Install the blower housing. Make sure the
engine turns over with the starter rope.
7. Install the governor lever and connect the
return spring (A), carburetor throttle link
(B) and the choke link (C) to the control
bracket ([D] Fig. 17).
Fig. 17
8. Install muffler.
9. Install fuel tank.
10. Install fuel shut-off valve (A) and support
for air filter assembly (B).
11. Connect fuel hose ([C] Fig. 18) to
carburetor.
Fig. 18
12. Install air cleaner base ([A] Fig. 19).
Fig. 19
13. Install air filter and cover.
NOTE
: Make sure ground wire is mounted as
shown in (Fig. 20).
Fig. 20
13
235