Magnetron® Ignition Systems; Spark Plug Wires (All Models); Ignition System Removal (050000, 085400, 086400, 115400, 117400, 118400, 235400, 245400, 161400, 104700, 260700, 261700, 28Q700); Flywheels - Briggs & Stratton Vanguard 05000 Manual

Ignition System Removal
(050000, 085400, 086400, 115400,
117400, 118400, 235400, 245400,
161400, 104700, 260700, 261700,
28Q700)
1. Disconnect stop switch w ire (A) at
armature (B).
2. Remove armature screws ([C] Fig. 40).
3. Lift off armature.
3

FLYWHEELS

Flywheel Removal

(050000, 085400, 086400, 115400,
117400, 118400, 138400, 185400,

235400, 245400, 28Q700)

Eye injury could occur if flywheel is struck
with a hard object.
•
Do not strike flywheel with hard object
or steel tool.
•
Wear safety goggles or other eye
protection.
1. If necessary, remove the fan from the
flywheel.
2. Prevent the flywheel from turning with
Flywheel Strap Wrench,
72
Fig. 40
WARNING
Fig.
#19433, ([A]
41) or other strap wrench or socket-type
flywheel holder, determined above.
3. Turn the flywheel nut CCW with a 1/2 in.
breaker bar (B) and socket to remove.
Fig. 41
4. Thread the flywheel nut (A) on to the
crankshaft until to p of nut is flush with end
of crankshaft threads, Fig. 42.
5. Install Flywheel Puller
#19203
puller screws into flywheel puller holes
until puller contacts flywheel nut.
6. Tighten puller nuts (C) equally until
flywheel loosens, (Fig. 42) and/or (Fig.44).
Fig. 42
(B). Turn