Control Bracket Removal (28Q700); Engine Baffles; Engine Baffle Removal (05000, 085400, 086400, 115400, 117400, 118400, 138400, 185400, 235400, 245400) - Briggs & Stratton Vanguard 05000 Manual

Control Bracket Removal
(28Q700)
NOTE
: Part of the control bracket assembly
must be removed in order to remove the
carburetor. SEE SECTION 5- REMOVING
CARBURETOR.
To remove remaining control bracket
components:
1. Remove the three screws ([A] Fig. 15) that
secure the bracket to the cylinder.
Fig. 15
2. Disconne ct the governor return sprin g (A)
and the throttle link ([B] Fig. 16) from the
governor lever.
Fig. 16
3. Set control bracket aside.
4. Loosen nut that secures governor lever to
governor shaft.
5. Remove governor lever and set aside.

ENGINE BAFFLES

Engine Baffle Removal
(05000, 085400, 086400, 115400,
117400, 118400, 138400, 185400,
235400, 245400)
The engine baffles for the models listed above
consist of stamped sheet metal parts (A) that
wrap around the cylinder. The larger engines
have separate lower baffles (B) and some have
an additional plastic baffle ([C] Fig. 17) to seal
the blower housing.
Remove the screws that secure the baffles to the
engine.
Fig. 17
3
65