En Gine Baffle Rem Oval (161400); Engine Baffle Removal (260700, 261700); Engine Baffle Removal (28Q700); Install Rope And Handle Assembly - Briggs & Stratton Vanguard 05000 Manual

Engine Baffle Removal
(161400)
The main cylinder baffle is removed with the
engine control bracket. SEE SECTION 3-
CONTROL BRACKET REMOVAL..
Remove the bo lts holding the baffle shown below
([A] Fig. 18).
3
Engine Baffle Removal
(260700, 261700)
1. Remove the mounting bolts shown in
([A] Fig. 19).
2. Remove the bolts that secure the oil fill
tube.
66
Fig. 18
Fig. 19
NOTE
: The l ower baffle still has one mounting
bolt that will be removed when the flywheel is
removed. SEE SECTION 3- FLYWHEEL
REMOVAL.
3. Remove the bolts that secure the baffle to
the cylinder ([A] Fig. 20).
Fig. 20
Engine Baffle Removal
(28Q700)
1. Remove the two bolts ([A] Fig. 21).
Fig. 21
NOTE
: The blower housing support/baffle plate
([B] Fig.21) must be removed after the flywheel
is removed. SEE SECTION 3- BLOWER
HOUSING REMOVAL.