Sensor (Upper Media Exit) Static Jam - Lexmark X95x series Service Manual

Step Action and questions
Check the sensor (compiler
2
media present) for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (compiler
media present).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (compiler
3
media present) for proper
connection.
Is the above component
properly connected?
Check the finisher controller
4
PCBA for proper connection.
Is the above component
properly connected?
POR the machine.
5
Does the error continue?

485.01 Sensor (upper media exit) static jam

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the sensor (upper media
2
exit) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (upper media
exit).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Yes
Go to Step 3.
Replace the sensor(compiler
media present)
Go to Step 5.
Replace the finisher controller
PCBA.
Go to
"Finisher PCBA removal"
on page 4-350.
Yes
Go to step 2.
Go to Step 4.
7558-xxx
No
Go to Step 2.
Replace connections.
Replace the connections.
Problem resolved
No
Remove any media or media
fragments.
Go to Step 3.
Diagnostic information
Previous
Next
Go Back
2-221