Lexmark X95x series Service Manual page 331

Step
Check the media condition. Ensure the recommended
4
media is being used.
Load new, dry, recommended media.
Reprint the defective image.
Does the problem remain?
Check the 2nd transfer roller for contamination and
5
wear.
Is the 2nd transfer roller free of excess wear and
contamination?
Check the registration transport roller assembly.
6
Are all drive rollers on the registration transport
roller assembly free of contamination, wear and
damage?
Check the heat belt and pressure roll in the fuser
7
assembly for scratches or defects.
CAUTION: The fuser assembly might be
hot. Allow the fuser assembly to cool.
Remove the fuser assembly.
Is there contamination or cracks on the heat belt
and/or pressure roll?
Check Yes
Go to step 5. Problem resolved
Go to step 6. Replace the 2nd
transfer roller.
Go to
"2nd
transfer roller
removal" on
page 4-28.
Go to step 7. Replace
registration
transport roller
assembly.
Go to
"Registration/
transport roller
assembly
removal" on
page 4-149.
Replace the Inspect the
fuser assembly. machine for
obstructions in
Go to
"Fuser
the media path.
assembly
removal" on
page 4-84.
Diagnostic information
7558-xxx
Previous
No
Next
Go Back
2-281