Lexmark X95x series Service Manual page 43

Hide thumbs Also See for X95x series:

Table of Contents

Paper transport

The paper capacity is 50 sheets.

Finishing options are not supported in this bin.

Envelopes are routed here.

Universal paper is routed here when it is longer than 483 mm (19 in.) or shorter than 148 mm (6 in.).

Finisher standard bin

The paper capacity is 500 sheets.

Envelopes and executive-size paper are not supported in this bin.

Finishing options are not supported in this bin.

The paper capacity is 3,000 sheets when the standard finisher is installed.

The paper capacity is 1,500 sheets when the booklet finisher is installed.

Bin 1 finishing features

—Not supported

Envelopes (any size)

*For the Universal paper size, the finishing edge must be at least 9 in. (229

mm) for a 3-hole punch and 10 in. (254 mm) for a 4-hole punch.

Punch—Selects from two-, three-, or four-hole punch

Single staple—Uses only one staple

Double staple—Uses two staples

Double dual staple—Uses two sets of two staples. This setting is supported

only for widths between 8 in. (203 mm) and 12 in. (297 mm) with lengths

between 7 in. (182 mm) and 17 in. (432 mm).

General information