Ttm Tray 3 Feeder Removal - Lexmark X95x series Service Manual

Hide thumbs Also See for X95x series:
Table of Contents

Advertisement

Remove the two screws (C) securing the TTM lower transport motor to the machine.
4.
Note: When removing the TTM lower transport motor, the drive belt will become detached.
5.
Remove the TTM lower transport motor.
Reinstallation note: To correctly set the drive belt tension, install the TTM lower transport motor and the TTM
lower transport motor tension spring before completely tightening the three screws.

TTM tray 3 feeder removal

Remove the TTM tray 3 media tray out from the machine. See
1.
page
4-290.
Pull open, but do not remove, the TTM tray 4 media tray.
2.
Open the left door.
3.
"TTM tray 3 media tray removal" on
Repair information
7558-xxx
Previous
Next
Go Back
4-287

Advertisement

Table of Contents
loading

Table of Contents