Sensor (Adf Inverter) Lag Jam - Lexmark X95x series Service Manual

7558-xxx
Step Action and questions
Check the sensor (ADF inverter)
3
for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch ADF/SCANNER
SENSOR TESTS.
4. Touch Sensor (ADF
inverter).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (ADF inverter)
4
for proper connection.
Is the above component
properly connected?
Check the ADF registration motor
5
for proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch ADF/SCANNER
MOTOR TESTS.
4. Touch ADF registration
motor.
Does the above component
operate properly?
Check the ADF registration motor
6
for proper connection.
Is the above component
properly connected?
Place an undamaged document
7
in the ADF, and perform an ADF
test.
Does the error remain?

285.05 Sensor (ADF inverter) lag jam

Step Action and questions
Check the media path.
1
Is the media path free of any
media or media fragments?
Service Manual
2-154
Yes
Go to step 5.
Replace the sensor (ADF
inverter). Go to
"Sensor (ADF
inverter) removal" on
page 4-241.
Go to step 7.
Replace the ADF registration
motor. Go to
"ADF registration
motor removal" on page 4-215.
Replace the ADF controller
PCBA. Go to
"ADF controller
PCBA removal" on page 4-200.
Yes
Go to step 2.
No
Go to step 4.
Replace the connections.
Go to step 6.
Replace the connections.
Problem resolved
No
Remove any media or media
fragments.
Previous
Next
Go Back