Lexmark X95x series Service Manual page 229

Step Action and questions
Check the sensor (stacker bin
3
level encoder) for proper
connection.
Is the above component
properly connected?
Check the sensor (stacker bin
4
level R) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (stacker bin
level 1).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (stacker bin
5
level R) for proper connection.
Is the above component
properly connected?
Check the sensor (stacker bin
6
level F) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (stacker bin
level 2).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (stacker bin
7
level F) for proper connection.
Is the above component
properly connected?
Yes
Replace the sensor (stacker bin
level encoder). Go to
"Sensor
(stacker bin level encoder)
removal" on page 4-399.
Go to step 6.
Replace the sensor (stacker bin
level R). Go to
"Sensor (stacker
bin level R) removal" on
page 4-399.
Go to step 8.
Replace the sensor (stacker bin
level F). Go to
"Sensor (stacker
bin level F) removal" on
page 4-398.
7558-xxx
No
Replace the connection.
Go to step 5.
Replace the connection.
Go to step 7.
Replace the connection.
Diagnostic information
Previous
Next
Go Back
2-179