Lexmark X95x series Service Manual page 437

Hide thumbs Also See for X95x series:

Table of Contents

• Booklet knife solenoid

This solenoid transfers the booklet folding/exit drive motor assembly to the knife through the gear.

Booklet media

entrance roll

Booklet folding

roll assembly

Booklet media

exit roll assembly

Sensor (booklet media

exit roll assembly)

• Sensor (booklet front tamper HP)

This photo sensor detects the home position of the booklet front tamper.

• Sensor (booklet rear tamper HP)

This photo sensor detects the home position of the booklet Rear tamper.

• Sensor (booklet compile media in)

This photo sensor detects paper present in the booklet compiler tray.

Booklet front tamper motor

This stepping motor drives the booklet front tamper.

• Booklet rear tamper motor

This stepping motor drives the booklet rear tamper.

• Sensor (booklet knife HP)

This photo sensor detects the home position (stored condition) of knife.

• Sensor (knife folding)

This photo sensor detects the fold position (protruded condition) of knife.

• Booklet staple assembly

This booklet stapler consist of two stapler units (including stapler low switch) and booklet stapler head

• Booklet paddle motor

This DC motor drives the paddle at the booklet section.

• Sensor (booklet end guide HP)

This photo sensor detects the home position of the booklet end guide.

• Booklet end guide drive motor

This stepping motor moves the booklet end guide up and down.

Sensor (booklet

media entrance)

Booklet media entrance

Booklet folding/exit

motor assembly

Booklet knife solenoid

Diagnostic aids