Sensor (Bridge Media Entrance) Removal - Lexmark X95x series Service Manual

Hide thumbs Also See for X95x series:

Table of Contents

Release the hook (E) securing the decurler clutch to the machine.

Slide the decurler clutch away from the machine, and remove it.

Reinstallation note: When replacing the decurler clutch, ensure that the hook on the decurler clutch is

captured by the boss on the bracket.

Sensor (bridge media entrance) removal

Remove the bridge unit assembly. See

Place the bridge unit assembly upside down.

"Bridge unit assembly removal" on page

Repair information