202.01 Sensor (fuser exit) static jam
Step
Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the sensor (fuser exit) for
2
proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch PRINTER SENSOR
TESTS.
4. Touch Sensor (fuser exit).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (fuser exit) for
3
proper connection.
Is the above component
properly connected?
Perform a print test. Go to
4
"PRINT TESTS" on page
Does the error continue?
202.03 Exit Sensor 1 Late Jam
Step
Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the sensor (fuser exit) for
2
proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch PRINTER SENSOR
TESTS.
4. Touch Sensor (fuser exit).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Yes
Go to step 2.
Go to step 4.
Replace the fuser assembly.
Go to
"Fuser assembly
removal" on page
Replace the Upper printer engine
card assembly.
3-25.
Go to
"Upper printer engine
PCBA removal" on page
Yes
Go to step 2.
Go to step 4.
No
Remove any media or media
fragments.
Go to step 3.
Replace the connection.
4-84.
Problem resolved
4-186.
No
Remove any media or media
fragments.
Go to step 3.
Diagnostic information
7558-xxx
Previous
Next
Go Back
2-101