Sensor (Media On Belt) Static Jam; Sensor (Media On Belt) Late Jam - Lexmark X95x series Service Manual

7558-xxx

201.01 Sensor (media on belt) static jam

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the sensor (media on belt )
2
for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch PRINTER SENSOR
TESTS.
4. Touch Sensor (paper on
belt).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (media on belt)
3
for proper connection.
Is the above component
properly connected?
Perform a print test. Go to
4
"PRINT TESTS" on page
Does the error continue?

201.03 Sensor (media on belt) late jam

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the sensor (media on belt )
2
for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch PRINTER SENSOR
TESTS.
4. Touch Sensor (paper on
belt).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Service Manual
2-98
Yes
Go to step 2.
Go to step 4.
Replace the sensor (media on
belt).
Go to
"Sensor (media on belt)
removal" on page
Replace the lower engine PCBA.
3-25.
Go to
"Lower engine PCBA
removal" on page
Yes
Go to step 2.
Go to step 4.
No
Remove any media or media
fragments.
Go to step 3.
Replace the connection.
4-155.
Problem resolved
4-104.
No
Remove any media or media
fragments.
Go to step 3.
Previous
Next
Go Back