Booklet Stapler Unit Assembly Removal - Lexmark X95x series Service Manual
Hide thumbs
Also See for X95x series:
- Service manual (1182 pages) ,
- Administrator's manual (79 pages) ,
- Manual (45 pages)
Table of Contents
Advertisement
7558-xxx
Remove the booklet rear tamper motor (A).
5.
Booklet stapler unit assembly removal
Open the finisher front door assembly.
1.
Pull the booklet stapler unit out of the machine.
2.
Release the hook securing the right ball bearing slide (A).
3.
4.
Pull the booklet stapler unit assembly (B) from the machine.
Remove the two screws securing the booklet stapler unit assembly (B) to the left ball bearing slide (C).
5.
Service Manual
4-330
A
Connector
Left
Previous
Next
Go Back
Advertisement
Table of Contents
