Sensor (Tray 4 Feed Out) Late Jam (80K Interval Exceeded For Feed Rollers); Previous - Lexmark X95x series Service Manual

7558-xxx
Step Action and questions
Check the tray module upper
8
transport motor for proper
operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch 1TM/3TM/TTM upper
transport motor.
Does the above component
operate properly?
Check the tray module upper
9
transport motor for proper
connection.
Is the above component
properly connected?
Check the the tray module
10
controller PCBA for proper
connection.
Is the above component
properly connected?
POR the machine, and perform a
11
print test. Go to
"PRINT TESTS"
on page 3-25.
Does the error continue?
POR the machine, and perform a
12
print test. Go to
"PRINT TESTS"
on page 3-25.
Does the error continue?

244.56 Sensor (tray 4 feed out) late jam (80K interval exceeded for feed rollers)

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the pick/feed rollers for
2
wear.
Is the above component free of
excess wear and damage?
Service Manual
2-124
Yes
Go to step 10.
Replace the tray module upper
transport motor. Go to
"Tray
module upper transport motor
removal" on page 4-284.
Replace the tray module
controller PCBA. Go to
"Tray
module controller PCBA
removal" on page 4-276.
Go to step 11.
Replace the lower engine PCBA.
Go to
"Lower engine PCBA
removal" on page 4-104.
Replace the upper printer engine
PCBA.
Go to
"Upper printer engine
PCBA removal" on page 4-186.
Yes
Go to step 2.
Go to step 3.
No
Go to step 9.
Replace the connections.
Replace the connections.
Problem resolved
Problem resolved
No
Remove any media or media
fragments.
Replace the pick/feed rollers.
Go to
"Pick roller removal" on
page 4-141.

Previous

Next
Go Back