Sensor (Booklet Rear Tamper Hp) Lag Jam - Lexmark X95x series Service Manual

7558-xxx
Step Action and questions
Check the booklet rear tamper
7
motor for proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch FINISHER MOTOR
TESTS.
4. Touch Booklet tamper rear
motor (forward).
5. Touch Booklet tamper rear
motor (reverse).
Does the above component
operate properly?
Check the booklet tamper rear
8
motor.
Is the above component
properly connected?
Perform a POR.
9
Does the error continue when
the power is turned off/on?
Perform a POR.
10
Does the error continue when
the power is turned off/on?

381.34 Sensor (booklet rear tamper HP) lag jam

Step Action and questions
Check the booklet unit interface
1
connector assembly.
Is the above component free of
damage?
Check the main connector on the
2
booklet unit sensor interface
cable assembly.
Is the above component free of
damage?
Check the main connector on the
3
booklet unit motor interface cable
assembly.
Is the above component free of
damage?
Service Manual
2-198
Yes
Go to step 6.
Replace the booklet rear tamper
motor. Go to
"Booklet rear
tamper motor removal" on
page 4-329.
Replace the booklet controller
card assembly. Go to
"Booklet
controller card assembly
removal" on page 4-319.
Replace the finisher controller
PCBA. Go to
"Finisher PCBA
removal" on page 4-350.
Yes
Go to step 2.
Go to step 3.
Go to step 4.
No
Go to step 5.
Replace the connection.
Problem resolved
Problem resolved
No
Replace the booklet unit interface
contact.
Replace the booklet sensor
interface cable assembly.
Replace the booklet motor
interface cable assembly.
Previous
Next
Go Back