4Xx Service Error Codes - Lexmark X95x series Service Manual

3xx service error codes
Error code
381.40
Service finisher error
381.41
Service finisher error

4xx service error codes

Error code
401.01
Service finisher error
401.03
Service finisher error
401.05
Service finisher error
402.01
Service finisher error
402.03
Service finisher error
481.01
Service finisher error
481.03
Service finisher error
Description
Sensor (booklet compiler media
present) error
Communication error with booklet
controller card assembly
Description
Sensor (finisher media entrance) static
jam.
Sensor (bridge media entrance) late
jam
Sensor (bridge media entrance) lag
jam
Sensor (bridge media exit) static jam
Sensor (bridge media exit) late jam
Sensor (finisher media entrance) static
jam
Sensor (finisher media entrance) late
jam
Action
The sensing area of the sensor (booklet
compiler no media) did not detect any
media when the booklet stapler motor was
activated.
Go to
"381.40 Sensor (booklet compiler
media present) error" on page
A communication error has occurred with
the booklet controller card assembly and
the finisher controller card assembly.
Go to
"381.41 Communication error with
booklet controller card assembly" on
page 2-207.
Action
Media remains detected by the sensor
(finisher media entrance).
Go to
"401.01 Sensor (finisher media
entrance) static jam" on page
The media is late reaching the sensor
(bridge unit media entrance) within the
specified time.
Go to
"401.03 Sensor (bridge media
entrance) late jam" on page
The sensor (bridge media entrance)
activated, but did not clear within the
specified time.
Media remains detected by the sensor
(bridge media exit).
Go to
"402.01 Sensor (bridge media
exit) static jam" on page 2-211.
The media is late reaching the sensor
(bridge media exit) within the specified
time.
Go to
"402.03 Sensor (bridge media
exit) late jam" on page 2-212.
Media remains detected by the sensor
(finisher media entrance).
Go to
"401.01 Sensor (finisher media
entrance) static jam" on page
The media is late reaching the sensor
(bridge media exit) within the specified
time.
Go to
"481.03 Sensor (finisher media
entrance) late jam" on page
Diagnostic information
7558-xxx
Previous
Next
2-206.
Go Back
2-208.
2-208.
2-208.
2-214.
2-31