202.05 Sensor (Fuser Exit) Lag Jam - Lexmark X95x series Service Manual

7558-xxx
Step Action and questions
Check the registration clutch for
12
proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch Registration clutch.
Does the above component
operate properly?
Check the registration clutch for
13
proper connection.
Is the above component
properly connected?
Perform a print test. Go to
14
"PRINT TESTS" on page
Does the error continue?

202.04/202.05 Sensor (fuser exit) lag jam

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the sensor (fuser exit) for
2
proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch PRINTER SENSOR
TESTS.
4. Touch Sensor (fuser exit).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (fuser exit) for
3
proper connection.
Is the above component
properly connected?
Service Manual
2-104
Yes
Go to step 14.
Replace the registration transport
roller .
Go to
"Registration/transport
roller assembly removal" on
page 4-149.
Replace the upper printer engine
PCBA.
3-25.
Go to
"Upper printer engine
PCBA removal" on page
Yes
Go to step 2.
Go to step 2.
Replace the fuser assembly.
Go to
"Fuser assembly
removal" on page
No
Go to step 13.
Replace the connection.
Problem resolved
4-186.
No
Remove any media or media
fragments.
Replace the fuser assembly.
Go to
"Fuser assembly
removal" on page
Replace the connections.
4-84.
Previous
Next
Go Back
4-84.