Sensor (Compiler Media Present) Late Jam - Lexmark X95x series Service Manual

7558-xxx
Step Action and questions
Check the exit stepper motor for
6
proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch FINISHER MOTOR
TESTS.
4. Touch Exit motor.
Does the above component
operate properly?
Check the stepper motor for
7
proper connection.
Is the above component
properly connected?
Check the finisher controller
8
PCBA for proper connection.
Is the above component
properly connected?
POR the machine.
9
Does the error continue?

487.05 Sensor (compiler media present) late jam

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the eject shaft roll for
2
damage and contamination.
Is the above component free of
damage and contamination?
Service Manual
2-228
Yes
Go to step 8.
Replace the stepper motor.
Go to
"Stepper motor (exit)
assembly and belt (exit)
removal" on page 4-414.
Go to Step 9.
Replace the finisher controller
PCBA.
Go to
"Finisher PCBA removal"
on page 4-350.
Yes
Go to step 2.
Go to Step 3.
No
Go to step 7.
Replace the connection.
Replace the connections.
Problem resolved
No
Remove any media or media
fragments.
Replace the eject shaft roll. Go to
"Eject roll shaft removal" on
page 4-339.
Previous
Next
Go Back