Sensor (Punch Unit Side Registration Pair) With Bracket Removal - Lexmark X95x series Service Manual

7558-xxx
Remove the two screws securing the bracket (C) to the punch unit assembly (D).
9.
Connector
Release the hooks securing the sensor (punch unit motor encoder) (B) to the bracket (C).
10.
11. Remove the sensor (punch unit motor encoder) (B).

Sensor (punch unit side registration pair) with bracket removal

Open the finisher front door assembly.
1.
Remove the rear upper cover. See
2.
Remove the upper media bin assembly. See
3.
Remove the top cover. See
4.
5. Remove the punch carriage assembly. See
Remove the screw securing the cover (A) to the punch unit assembly (B).
6.
Remove the cover.
7.
Service Manual
4-396
B
C
Clamp
"Rear upper cover removal" on page
"Top cover removal" on page
"Punch carriage assembly removal" on page
B
A
"Upper media bin assembly removal" on page
4-418.
D
4-377.
4-419.
4-372.
Previous
Next
Go Back