7558-xxx
Remove the two screws securing the buffer diverter gate solenoid to the finisher.
5.
6.
Remove the buffer diverter gate solenoid.
Note: The link (B) may remain inserted into the finisher.
7.
Remove the link.
Note: When the link is removed, the buffer diverter gate may become detached. See
gate removal" on page
Buffer pinch guide assembly removal
Remove the finisher front door assembly. See
1.
Remove the rear upper cover. See
2.
Remove the rear lower cover. See
3.
Remove the stapler unit frame. See
4.
5.
Lower the buffer pinch guide assembly (A) as far as it will go.
Service Manual
4-336
B
B
4-334.
"Rear upper cover removal" on page
"Upper media bin front cover removal" on page
"Stapler unit frame removal" on page
A
Rear
"Finisher front door assembly removal" on page
Clamp
Connector
"Buffer diverter
4-345.
4-377.
4-420.
4-409.
Previous
Next
Go Back