Sensor (Booklet Compiler Media Present) Error - Lexmark X95x series Service Manual

7558-xxx
Step Action and questions
Check the main connector on the
3
booklet unit sensor interface
cable assembly.
Is the above component free of
damage?
Check the main connector on the
4
booklet unit motor interface cable
assembly.
Is the above component free of
damage?
Check the booklet stapler
5
interface cable assembly.
Is the above component free of
damage?
Check the connector on the back
6
of the booklet stapler unit
assembly.
Is the above component free of
damage.
Perform a print test booklet
7
stapled document.
Does the error remain?
Perform a POR.
8
Does the error continue when
the power is turned off/on?

381.40 Sensor (booklet compiler media present) error

Step Action and questions
Check the booklet unit interface
1
connector assembly.
Is the above component free of
damage?
Check the main connector on the
2
booklet unit sensor interface
cable assembly.
Is the above component free of
damage?
Check the main connector on the
3
booklet unit motor interface cable
assembly.
Is the above component free of
damage?
Service Manual
2-206
Yes
Go to step 4.
Go to step 5.
Go to step 6.
Replace the booklet folding/exit
drive motor assembly. Go to
"Booklet folding/exit drive
motor assembly removal" on
page 4-323.
Replace the booklet controller
card assembly. Go to
"Booklet
controller card assembly
removal" on page 4-319.
Replace the finisher controller
PCBA. Go to
"Finisher PCBA
removal" on page 4-350.
Yes
Go to step 2.
Go to step 3.
Go to step 4.
No
Replace the booklet sensor
interface cable assembly.
Replace the booklet motor
interface cable assembly.
Replace the booklet stapler
interface cable assembly.
Go to step 7.
Problem resolved
Problem resolved
No
Replace the booklet unit interface
connector assembly.
Replace the booklet unit sensor
interface cable assembly.
Replace the booklet unit motor
interface cable assembly.
Previous
Next
Go Back