Media Feeding; Outline; Hcf Media Feed Unit Assembly; Hcf Media Transport Roll Assembly - Lexmark X95x series Service Manual

7558-xxx

Media feeding

Previous

Outline

The HCF feeds media from the tray to the printer through the HCF media feed unit assembly and the HCF media
transport roll assembly.
Next

HCF media feed unit assembly

Go Back
The pick roller feeds media from the tray. The feed roller and the separation roller feed media from the pick roller
to the HCF media transport roll assembly.
Rollers are driven by the media feed lift motor on the media feed unit assembly at prescribed timings.
The media fed by the feed roller and separation roller passes through the sensor (pre-feed).
The sensor (pre-feed) detects the presence of media fed from the tray.
The sensor (pre-feed) controls the HCF media feed lift motor speed and on/off operation of the HCF pick
solenoid assembly.

HCF media transport roll assembly

This HCF media transport assembly roll transfers media fed from the HCF media feed unit assembly to the
printer.
The HCF media transport roll assembly is driven by the transport motor installed on the rear side.
The media fed with the HCF media transport roll assembly passes through the sensor (tray 5 feed-out).
Diagnostic aids
3-129