Sensor (Adf Pre Registration) Static Jam; Go Back; Sensor (Adf Pre Registration) Late Jam - Lexmark X95x series Service Manual

7558-xxx
Step Action and questions
Place an undamaged document
7
in the ADF, and perform an ADF
test.
Does the error remain?

282.01 Sensor (ADF pre registration) static jam

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the sensor (ADF feed out)
2
for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch ADF/SCANNER
SENSOR TESTS.
4. Touch Sensor (ADF
pre registration).
Does the display on the
operator panel change every
time the sensor actuator is
operated?
Check the sensor (ADF
3
pre registration) for proper
connection.
Is the above component
properly connected?
Place an undamaged document
4
in the ADF, and perform an ADF
test.
Does the error remain?

282.03 Sensor (ADF pre registration) late jam

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Service Manual
2-138
Yes
Replace the ADF controller
PCBA. Go to
"ADF controller
PCBA removal" on page 4-200.
Yes
Go to step 2.
Go to step 4.
Go to step 4.
Replace the ADF controller
PCBA. Go to
"ADF controller
PCBA removal" on page 4-200.
Yes
Go to step 2.
No
Problem resolved
No
Remove any media or media
fragments.
Replace the sensor (ADF
pre registration). Go to
"Sensor
(ADF pre-registration)
removal" on page 4-241.
Replace connections.
Problem resolved
No
Remove any media or media
fragments.
Previous
Next

Go Back