Sensor (Registration) Late Jam (Feeding From The Tray) - Lexmark X95x series Service Manual

7558-xxx
Step Action and questions
POR the machine, and perform a
6
PRINT test.
Go to
"PRINT TESTS" on
page 3-25.
Does the error continue?

200.03 Sensor (registration) late jam (feeding from the tray)

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the sensor (registration)
2
for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch PRINTER SENSOR
TESTS.
4. Touch Sensor (registration).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (registration)
3
for proper connection.
Is the above component
properly connected?
Check the registration drive motor
4
for proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch Registration motor.
Does the above component
operate properly?
Check the registration motor for
5
proper connection.
Is the above component
properly connected?
Service Manual
2-90
Yes
Replace the upper printer engine
PCBA.
Go to
"Upper printer engine
PCBA removal" on page 4-186.
Yes
Go to step 2.
Go to step 4.
Replace the registration/transport
roll assembly.
Go to
"Registration/transport
roller assembly removal" on
page 4-149.
Go to step 6.
Replace the registration drive
motor.
Go to
"Registration drive motor
removal" on page 4-147.
No
Problem resolved
No
Remove any media or media
fragments.
Go to step 3.
Replace the connections.
Go to step 5.
Replace the connection.
Previous
Next
Go Back