Hcf Feed Unit Removal; Hcf Left Cover Removal - Lexmark X95x series Service Manual

HCF feed unit removal

Remove the HCF media tray assembly from the printer. See
1.
page 4-433.
Remove the two screws securing the media feed unit assembly (A) on the front side.
2.
Pull the media feed unit assembly (A) out of the machine in the direction of the arrow.
3.
Note: More force to remove the media feed unit (A) may be required due to the electrical connector inside
the machine.
Guide shaft

HCF left cover removal

Remove the five screws securing the HCF left cover (A) to the unit.
1.
2. Remove the HCF left cover (A).
A
"HCF media tray assembly removal" on
A
Front
Repair information
7558-xxx
Previous
Next
Go Back
4-429