Lexmark X95x series Service Manual page 78

7558-xxx
3xx service error codes
Error code
381.08
Service finisher error
381.09
Service finisher error
381.10
Service finisher error
381.11
Service finisher error
381.12
Service finisher error
381.13
Service finisher error
381.14
Service finisher error
381.15
Service finisher error
381.16
Service finisher error
381.17
Service finisher error
Service Manual
2-28
Description
Sensor (media eject clamp HP) late
error
Sensor (media eject clamp HP) lag
error
Sensor (media eject shaft HP) late
error
Sensor (media eject shaft HP) lag error
Stacker bin error
Sensor (stacker bin upper limit) error
Sensor (stacker bin no media) error
Sensor (punch side reg 1) lag error
Sensor (punch side reg 2) lag error
Sensor (punch cam HP) late error
Sensor (punch cam HP) lag error
Action
The sensor (media eject clamp HP) didn't
activate within the specified time.
Go to
"381.08 Sensor (media eject
clamp HP late jam" on page
The sensor (media eject clamp HP)
activated, but did not clear within the
specified time.
Go to
"381.09 Sensor (media eject
clamp HP) lag jam" on page
The sensor (media eject clamp HP) did not
activate within the specified time.
Go to
"381.10 Sensor (media eject shaft
HP) late jam" on page 2-175.
The sensor (media eject shaft HP)
activated, but did not clear within the
specified time.
Go to
"381.11 Sensor (media eject shaft
HP) lag jam" on page 2-177.
The sensor (stacker bin level encoder) did
not activate within the specified time after
the tray starts to lift.
Go to
"381.12 Stacker bin failure" on
page 2-178.
The media level exceeds the height that is
allowed by the sensor (stacker upper limit).
Go to
"381.13 Sensor (stacker bin upper
limit) error" on page 2-180.
The media level doesn't reach the height
that is allowed by the sensor (stacker bin
no media).
Go to
"381.14 Sensor (stacker bin no
media) error" on page 2-182.
The sensor (punch side reg 1) or (punch
side reg 2) activated, but did not clear
within the specified time.
Go to
"381.15 Sensor (punch side reg 1/
2) lag jam" on page 2-184.
The sensing area of the sensor (punch
cam HP) is not interrupted during the
specified time after the punch unit starts
moving to the home position.
Go to
"381.16 Sensor (punch cam HP)
late jam" on page 2-186.
The sensor (punch cam HP) activated, but
did not clear within the specified time.
Go to
"381.17 Sensor (punch cam HP)
lag jam" on page 2-187.
Previous
Next
2-173.
Go Back
2-174.