Lexmark X95x series Service Manual page 180

7558-xxx
Step Action and questions
Check the transport rollers for
3
wear.
Is the above component free of
excess wear and damage?
Check the sensor (tray 5 feed out)
4
for proper connection.
Is the above component
properly connected?
Check the HCF feed/lift motor for
5
proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch HCF feed/lift motor
(feed).
5. Touch HCF feed/lift motor
(lift).
Does the above component
operate properly?
Check the HCF feed lift motor for
6
proper connection.
Is the above component
properly connected?
Check the HCF transport motor
7
for proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch HCF transport motor.
Does the above component
operate properly?
Check the HCF transport motor
8
for proper connection.
Is the above component
properly connected?
Service Manual
2-130
Yes
Go to step 4.
Clean or replace the sensor (tray
5 feed out). Go to
"HCF sensor
(tray 5 feedout) removal" on
page 4-440.
Go to step 7.
Replace the HCF feed lift motor.
Go to
"HCF feed lift motor
removal" on page 4-427.
Go to step 9.
Replace the HCF transport motor.
Go to
"HCF transport motor
removal" on page 4-446.
No
Replace the transport rollers.
Go to
"HCF transport roller kit
removal" on page 4-446.
Replace the connection.
Go to step 6.
Replace the connections.
Go to step 8.
Replace the connections.
Previous
Next
Go Back