Buffer Diverter Gate Solenoid Removal - Lexmark X95x series Service Manual

Remove the link (B).
5.
Buffer diverter gate
Move the buffer diverter gate (C) toward the rear, the left, and then forward, as shown.
6.
Remove the buffer diverter gate (C).
7.

Buffer diverter gate solenoid removal

Open the finisher front door assembly.
1.
Remove the rear upper cover. See
2.
Disconnect the connector from the buffer diverter gate solenoid (A).
3.
Release the harness from the clamp.
4.
B
C
"Rear upper cover removal" on page
A
Rear
A
4-377.
Repair information
7558-xxx
Previous
Next
Go Back
4-335