Booklet Staple Fail - Lexmark X95x series Service Manual

Step Action and questions
Check the booklet knife solenoid.
7
Is the above component
properly connected?
Check the booklet folding/exit
8
drive motor assembly for proper
operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch FINISHER MOTOR
TESTS.
4. Touch Booklet folding/exit
motor (forward).
5. Touch Booklet folding/exit
motor (forward).
Does the above component
operate properly?
9 Is the booklet folding/exit drive
motor assembly properly
connected?
Perform a POR.
10
Does the error continue when
the power is turned off/on?
Perform a POR.
11
Does the error continue when
the power is turned off/on?

381.39 Booklet Staple Fail

Step Action and questions
Check the booklet unit stapler
1
assembly.
Is the above component
properly inserted into the
booklet maker unit assembly?
Check the booklet unit interface
2
connector assembly.
Is the above component free of
damage?
Yes
Replace the booklet knife
solenoid. Go to
"Booklet fold
solenoid removal" on
page 4-322.
Go to step 10.
Replace the booklet folding/exit
drive motor assembly. Go to
"Booklet folding/exit drive
motor assembly removal" on
page 4-323.
Replace the booklet controller
card assembly. Go to
"Booklet
controller card assembly
removal" on page 4-319.
Replace the finisher controller
PCBA. Go to
"Finisher PCBA
removal" on page 4-350.
Yes
Go to step 2.
Go to step 3.
7558-xxx
No
Replace the connection.
Go to step 9.
Replace the connection.
Problem resolved
Problem resolved
No
Ensure that the booklet unit
stapler assembly is properly
inserted.
Replace the booklet unit interface
contact.
Diagnostic information
Previous
Next
Go Back
2-205