Sensor (Fuser Exit) Static Jam - Lexmark X95 series Service Manual

Step Action and questions
Check the registration clutch for
10
proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch Registration clutch.
Does the above component
operate properly?
Check the registration clutch for
11
proper connection.
Is the above component
properly connected?
Perform a print test. Go to
12
"PRINT TESTS" on page
Does the error continue?

202.01 Sensor (fuser exit) static jam

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the sensor (fuser exit) for
2
proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch PRINTER SENSOR
TESTS.
4. Touch Sensor (fuser exit).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (fuser exit) for
3
proper connection.
Is the above component
properly connected?
Yes
Go to step 12.
Replace the registration transport
roller .
Go to
"Registration/transport
roller assembly removal" on
page 4-149.
Replace the lower engine PCBA.
3-25.
Go to
"Lower engine PCBA
removal" on page
Yes
Go to step 2.
Go to step 4.
Replace the fuser assembly.
Go to
"Fuser assembly
removal" on page
No
Go to step 11.
Replace the connection.
Problem resolved
4-104.
No
Remove any media or media
fragments.
Go to step 3.
Replace the connection.
4-84.
Diagnostic information
7558-xxx
Previous
Next
Go Back
2-101