Sensor (Registration) Late Jam (Feeding From The Tray) - Lexmark X95 series Service Manual

7558-xxx
Step Action and questions
Check the sensor (registration)
3
for proper connection.
Is the above component
properly connected?
Check the registration/transport
4
roll assembly.
Is the above component free of
excess wear and
contamination?
POR the machine, and perform a
5
PRINT test.
Go to
"PRINT TESTS" on
page 3-25.
Does the error continue?
POR the machine, and perform a
6
PRINT test.
Go to
"PRINT TESTS" on
page 3-25.
Does the error continue?

200.03 Sensor (registration) late jam (feeding from the tray)

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the sensor (registration)
2
for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch PRINTER SENSOR
TESTS.
4. Touch Sensor (registration).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (registration)
3
for proper connection.
Is the above component
properly connected?
Service Manual
2-90
Yes
Replace the registration/transport
roll assembly.
Go to
"Registration/transport
roller assembly removal" on
page 4-149.
Go to step 5.
Replace the lower engine PCBA.
Go to
"Lower engine PCBA
removal" on page 4-104.
Go to step 6.
Replace the upper printer engine
PCBA.
Go to
"Upper printer engine
PCBA removal" on page 4-187.
Yes
Go to step 2.
Go to step 4.
Replace the registration/transport
roll assembly.
Go to
"Registration/transport
roller assembly removal" on
page 4-149.
No
Replace the connections.
Clean or replace the registration/
transport roll assembly.
Go to
"Registration/transport
roller assembly removal" on
page 4-149.
Problem resolved
Problem resolved
No
Remove any media or media
fragments.
Go to step 3.
Replace the connections.
Previous
Next
Go Back