Mitsubishi F940GOT-SWD-E Operation Manual page 96

Graphic Operation Terminal F940GOT
4) Flow display (valid when the SWoD5C-GOTRE-PACK is used)
When an alarm device becomes ON, a corresponding alarm message is displayed at the
bottom of the user screen.
Alarm message
It can be set by editing "Common Setting"-"Auxiliary Setting"-"Screen" in the screen cre-
ation software whether or not the flow display is to be performed. (In the initial value, the
flow display is effective.)
• A message is flown from the right to the left.
• When two or more alarms have occurred, corresponding
messages are displayed in the ascending order of alarm
device No.
• When alarm devices become OFF, alarm messages disap-
pear.
• Alarm messages are displayed transparently on the user
screen, so keys on the user screen are effective.
Alarm Mode 6
6-4