Use Of Data In Fx-50Du-Tk(S)-E - Mitsubishi F940GOT-SWD-E Operation Manual

Graphic Operation Terminal F940GOT
9.3

Use of data in FX-50DU-TK(S)-E

By using the screen creation software FX-PCS-DU/WIN-E, the screen data in the FX-50DU-
TK(S)-E can be converted and used for the F940GOT.
The compatibility of the data in such a case is described below.
• How to use the screen data
When the model is changed from FX-50DU to F940GOT using the FX-PCS-DU/WIN-E
(V2.00 or later), the screen data is converted so that it can be used in the F940GOT.
• Cautions on conversion
Pay close attention to the following cautions during conversion.
1) Alarm function
The alarm notification method, "Overlap", "Change Screen" or "Print" can be selected for
each alarm in the 50DU. In the F940GOT, only one alarm notification method can be
selected for all alarms (That is, one alarm notification method is used for every alarm.).
When the data in the 50DU is converted and used in the F940GOT, the alarm notification
method selected in the head alarm device in the 50DU is adopted for every alarm.
2) Display of user screens
a) Image, Library Image and Image Indicator
When a black-and-white image is selected as an image to be used using the functions
above, the image can be displayed in colors other than black and white in the 50DU by
specifying the colors.
In the F940GOT, the same operation can be performed using the "Indicator" function.
b) Number and Ascii
Only numerics and character codes can be changed on the display screen.
Data can be changed while "Permit" is selected in "Number" and "Ascii". When a
numeric or character code on the screen is touched, the keyboard for data change is dis-
played to enable data change. (Each numeric and character code displayed on the
screen, functions as a touch key.)
c) Keyboard
The display position of the keyboard for numerics and text can be moved on the screen in
the F940GOT.
3) Screen changeover function
In the F940GOT, if the key condition and the input condition are set to "Always" when the
screen is changed over from the PLC (screen changeover using a control device in the
PLC), the priority is always given to screen changeover by a control device in the PLC.
Accordingly, if both the key condition and the input condition are set to "Always" in the set-
ting of screen changeover in the 50DU, the setting of screen changeover or the used
sequence program should be changed. (Refer to Sections 11 and 13.)
Creation of Display Screens 9
9-10