Connection Of Plc; Setting Of Connected Plc; Connection Of Melsec Fx/A Series (Cpu Port) - Mitsubishi F940GOT-SWD-E Operation Manual

Graphic Operation Terminal F940GOT
1.6

Connection of PLC

1.6.1

Setting of connected PLC

Set the connected PLC in "PLC TYPE" of "SET-UP MODE" described in Paragraph 2.2.
MELSEC FX/FX
FX Series manufactured by MITSUBISHI
2NC
MELSEC A Series manufactured by MITSUB-
ISHI
SYSMAC C Series manufactured by OMRON
FLEX-PC N Series manufactured by FUJI
ELECTRIC
PLC manufactured by Allen-Bradley Co., Inc.
PLC manufactured by Siemens AG
Micro computer board
• For the wiring to the PLC, refer to the hardware manual supplied together with the
F940GOT.
1.6.2

Connection of MELSEC FX/A Series (CPU PORT)

Connect the GOT to the programming connector in the PLC, and perform communication.
This communication method is easy because sequence programs, setting and interface are
not required once the connected PLC is set in the operation environment setting (on the SET-
UP MODE screen).
FX/FX /FX
2C
FX (when FX
2N
AnN,AnA,AnS,AnSJ,AnSH,A1SJH,A2C,A2CJ,
A0J2H,AnU,AnUS,A2USH,A1FCCPU
Motion controller
A171SCPU-S3
A171SHCPU
A172SHCPU
A272UHCPU
Connectable PLC
/FX /FX /FX
2C 0 0S 0N
Series name
/FX /FX /FX /FX
0 0S 0N 2N 2NC
-232-BD is used)
2N
/FX /
2N
CPU direct (CPU PORT)
CPU direct (CPU PORT) or computer link
(LINK PORT)
Computer link (LINK PORT)
Available soon
RS-232C port
CPU PORT (RS422)
Series (In 1:N connection, select "CPU PORT
(RS232C)" for the second and fourth PLCs.)
CPU PORT (RS232)
(In 1:N connection, select "CPU PORT
(RS232C)" for the second and fourth PLCs.)
CPU PORT (RS422)
(In 1:N connection, select "CPU PORT
(RS232C)" for the second and fourth PLCs.)
CPU PORT (RS422)
(In 1:N connection, select "CPU PORT
(RS232C)" for the second and fourth PLCs.)
Connection type
Connection type
Introduction 1
1-13