Mitsubishi F940GOT-SWD-E Operation Manual page 240

Graphic Operation Terminal F940GOT
• Combination of touch keys
If touch key is placed on an alarm history screen and assigned a key code from the table
below, it will perform its respective operation, also shown in the table.
Key codes used for the alarm history display function
Key code
FFB0
FFB1
FFB2
FFB3
FFB8
When a touch key to which "FFB8" (detailed information display function) is assigned, the
alarm message (comment window) or the base screen is changed over, and the detailed
information is displayed.
To display the detailed information, "Detail Display Destination" in "Alarm History Common
Setting" of the screen creation software should be preliminarily set to "Comment Window"
or "Base Screen".
• When "Comment Window" is selected
When this button is pressed, the
detailed display window is closed.
DETAILS
• Changeover of the base screen
A screen specified by "Detail Display No." in "Alarm History Common Setting"-"Device Mon-
itor"-"Edit" of the screen creation software is displayed.
Operation
Displays the cursor.
Deletes the cursor.
Moves the cursor upward.
Moves the cursor downward.
Displays the detailed information of the alarm
selected by the cursor.
• Move the cursor to an alarm message to be displayed
• A comment in the comment list specified by "Detail
Creation of Display Screen (SW¨ ¨ ¨ ¨ D5C-GOTRE-PACK) 12
in detail, and press the DETAIL key. Then, the detailed
display window is open as shown on the left.
Display No." in "Alarm History Common Setting"-
"Device Monitor"-"Edit" of the screen creation software
is displayed.
12-12