Mitsubishi F940GOT-SWD-E Operation Manual page 63

Graphic Operation Terminal F940GOT
• Outline of keyboard operations
The outline of keyboard operations are described below.
[ PROGRM LIST ]
c)
0 NOP
1 NOP
2 NOP
3 NOP
4 NOP
5 NOP
6 NOP
7 NOP
8 NOP
9 NOP
a) Function display
The function (READ, WRITE, INSERT or DELETE) is displayed. Press the MODE key to
change over the function.
b) END key
Terminates the program list and returns to the HPP MODE screen.
c) Bar
Indicates the edit position (line).
d) CLR key
Cancels the key currently being manipulated. This key does not delete instructions.
e) SP key
Enters space.
Use this key to write a set value of a timer or counter or write an application instruction.
f) STEP key
Displays the list from the entered step No.
g) Cursor control keys
Move up and down the bar c) to change over the edit line.
h) GO key
Determines the key operation.
a) b)
<WRITE> END
CLR
MODE MORE
LD AND OR FNC SP
LDI ANI ORI END
STEP
OUT ANB ORB STL
SET PLS MC RET
RST PLF MCR NOP GO
i)
d)
e)
f)
g)
h)
HPP Mode 4
4-3