Mitsubishi F940GOT-SWD-E Operation Manual page 118

Graphic Operation Terminal F940GOT
[ SET-UP MODE ]
[ SET-UP MODE ]
a) LANGUAGE
PLC TYPE
b)
SERIAL PORT (RS232C)
c)
OPENNING SCREEN
d)
MAIN MENU CALL KEY
e)
SET CLOCK
f)
SET BACKLIGHT
g)
BUZZER
h)
LCD CONTRAST
i)
CLEAR USER DATA
j)
k) Areas enclosed with broken lines indicate touch keys. (Bro-
Screen1
ken lines are not actually displayed on the screen.)
END
a) LANGUAGE
Allows to set the language such as Japanese or
English used in the system screens.
b) PLC TYPE
Allows to set the connected PLC type.
c) SERIAL PORT
To be set when a printer is connected to the GOT or
when transfer is performed with a micro computer
board.
d) OPENING SCREEN
Allows to set the duration in which the title screen is
displayed immediately after the power of the GOT is
l)
turned on.
e) MAIN MENU CALL KEY
Allows to set the positions of the touch key which calls
the SELECT MODE screen in the screen mode (that
is, while a user screen is displayed).
f) SET CLOCK
Allows to set the time used as the reference for the
time switch and the time display.
g) SET BACKLIGHT
Allows to set the time at which the backlight is turned
off after a continued idle period.
h) BUZZER
Allows to set whether or not a buzzer sound is issued
when a key is pressed.
i) LCD CONTRAST
Allows to set the LCD contrast.
j) CLEAR USER DATA
Deletes the entire user screen data.
k) END
Terminates the operation environment setting.
l) Cursor
Changes over selection of the menu item.
Other Mode 8
8-8